300,000
Customers
Secure
shipping
LIVE

Buy 5 kg Silver Bars

5kg Silver Bar Heraeus
Only 3 left to order

5kg Silver Bar Heraeus

£9,479.15
excl. UK import VAT and shipping
Available in 4–5 business days

Where minting stops.

Silver bars range from a few grams to about 31 kilograms. Between 10 grams and 15 kilograms, the small ones are usually minted and the large ones cast. Where one stops and the other begins, each house decides for itself.

Seven silver bars on dark slate, seen from above: on the left two long cast bars from Heraeus, on the right smaller bars down to a small square of one ounce
Cast and minted, at the same scale. Left, Heraeus 15 and 5 kg; top right, Heimerle + Meule 1 kg and Heraeus 500 g; bottom right, Umicore 250 g, a minted Umicore bar of 100 g and Heimerle + Meule 1 ounce. Bars: product photos from the shop, background generated with AI.

Umicore mints its silver bars from 10 to 100 grams. From 250 grams on, the house casts them, right up to 15 kilograms.

At Heraeus, the line falls in the same place. There, the ounce and 100 grams are minted, while 250 and 500 grams and 1, 5 and 15 kilograms are cast.

Other houses draw the line somewhere else entirely. Heimerle + Meule already casts the ounce, a small square with sides of 23.5 millimetres. Valcambi still mints the kilo, 130 millimetres long and 11.2 millimetres thick.

The larger the bar, the more likely it is cast.

How far each house mints

Sizes according to the makers, for Heraeus only the sizes the house itself lists; the minted ounce from Heimerle + Meule according to its bar in the shop. On the axis, it is as far from 10 to 100 grams as from 100 grams to 1 kilogram.

An empty mould of dark cast iron, open at the top, on a workbench, beside it a scoop of black charcoal powder
An open cast-iron mould and a scoop of charcoal powder. Image generated with AI.

Why molten silver shuns the air.

When pure silver melts, it takes up oxygen from the air. As it solidifies, the oxygen escapes again, and that can happen violently. Old encyclopaedias call it spitting.

“When melted in contact with air, pure silver absorbs a great deal of oxygen, which, however, escapes at the moment of solidification …”

Pierer’s Universal‑Lexikon, volume 16, 1863, entry “Spratzen”, translated

In doing so, the oxygen breaks through the crust that has already set and drives out the silver that is still liquid, into a spongy mass from which beads of silver leap. That is how Pierer’s encyclopaedia describes it.

The chemist Gay‑Lussac caught the oxygen under a bell jar filled with water. He obtained twenty to thirty times the volume of the silver, Pierer reports. In 1911, the Encyclopaedia Britannica gives twenty times. These are figures from encyclopaedias of 1863 and 1911, not present-day measurements.

The remedy is given in the same article: stir while the silver solidifies, “but best of all” sprinkle charcoal powder on it before it sets. According to Pierer, silver with 1 to 2 per cent copper does not spit, but pure silver does.

The oxygen is not entirely out of the picture. When a refinery on the London list assays its silver with a spectrograph today, oxygen and nitrogen expressly count as silver.

What happens as it solidifies

Diagram after the description in Pierer’s Universal‑Lexikon of 1863, not to scale.

Large cast silver bar from Heraeus, seen at an angle from above: the sides taper towards the bottom, and the top face is uneven
A cast 15‑kilogram bar from Heraeus: wider at the top than at the bottom. Product photo from the shop.

The dip in the top face.

Silver contracts strongly as it solidifies, the Meyers encyclopaedia of 1909 writes. On a cast bar, this shows on top: the top face can sink slightly in the middle, and rings from cooling can appear as well.

“Excessive shrinkage (i.e. the concavity of the top face of the Bar and any concentric cooling rings) must not significantly affect the clarity of the Bar marks or the safe stacking of the Bars.”

LBMA, Good Delivery Rules, Technical Specifications, section 2.1.4

The LBMA is the association of the London precious metals market. Its rules are written for the large bars of this market. They show what happens when silver is cast.

Silver has rules of its own there. A little hammering of the surface is allowed; for gold, at most the smoothing of a sharp burr. And closed moulds have been banned for silver since 2008, mainly because hidden cavities can form in them.

Cast bars are wider at the top than at the bottom. On the 15‑kilogram bar from Umicore, the top face measures about 235 by 100 millimetres and the bottom 210 by 80, with a height of 75 millimetres. For its silver bars, the LBMA requires a slope of 5 to 15 degrees, so that they are easy to grip.

Calculated from Umicore’s dimensions, the sides of its cast bars slope at about 6 to 10 degrees.

A cast bar shows on its top face how it solidified.

Four bars in cross-section, at the same scale

Dimensions from Umicore. In gold, the top face, the dip in it only suggested: its depth has not been measured. The slope is calculated from the top and bottom widths and the height.

Woodcut: at the top, cupels set one on top of another and the two-part mould in which they were pressed, at the bottom four assay cupels in decreasing size
Cupels and the mould in which they were pressed. Woodcut from Lazarus Ercker’s book on assaying, printed in 1629. Deutsche Fotothek, detail, public domain.

Silver is assayed differently from gold.

For gold, the LBMA requires its referee laboratory to carry out the fire assay, at least six times. For silver, the laboratory measures what is not silver and subtracts it from 1,000 parts.

“In the case of silver, the Referee will normally use one or other spectrographic analysis method and determine the silver assay by difference (with dissolved gases such as oxygen counting as silver).”

LBMA, Good Delivery List Rules, January 2026, Annex D, section 2.3

These are the rules for the refineries on the London list. They show how differently the two metals are assayed.

For a long time, silver was assayed in fire, in small dishes called cupels. In 1832, the French mint commission published instructions by Gay‑Lussac, the same man who had caught the oxygen in silver. After that, it could also be done “by the wet way”: the silver is precipitated with a solution of common salt instead of being assayed in fire in the cupel.

In 1874, Jacob Volhard described another wet method, with thiocyanate instead of common salt.

The common salt assay lives on in the standards. ISO 13756 determines silver in jewellery and precious metals with sodium or potassium chloride, ISO 11427 with potassium bromide, both today in the edition of 2024 and for silver contents of 100 to 999 parts per thousand. For higher contents, both name spectroscopy by difference.

With silver, the rest is what counts: 1,000 parts minus everything foreign.

The silver content by difference

According to the LBMA rules of January 2026. The foreign share is drawn greatly enlarged.

Three pounds, stamped in.

Stamping the weight onto the bar is an old practice. The silver treasure of Kaiseraugst in Switzerland includes a bar from shortly after AD 350. Punched into it is P III, three Roman pounds.

Flat, irregularly shaped silver bar, darkly tarnished, with fine incised signs at the top right
Much older still: a silver bar with Hittite hieroglyphs, 14th to 13th century BC. The Metropolitan Museum of Art, New York, public domain.

The bar measures 12.3 by 7.8 centimetres and is 1 centimetre thick. It weighs 947.8 grams, which corresponds to three Roman pounds.

Beside it are two small stamps reading GRONOPI, probably the name of the official in charge, and a round stamp with the bust and name of the Emperor Magnentius.

A kilo bar of today weighs almost the same, yet has a different shape. The cast kilo bar from Heraeus measures 111 by 51 millimetres and is 21 millimetres thick, more than twice as thick as the Roman bar.

Much older still is a silver bar with Hittite hieroglyphs in the Metropolitan Museum in New York, from the 14th to 13th century BC.

More than 1,650 years ago, the weight was already on the bar.

Three Roman pounds beside two kilo bars

Dimensions: Augusta Raurica, Augster Blätter zur Römerzeit 10, and the makers. All three from above at the same scale, the kilo bars as product photos from the shop, the Roman bar drawn as an outline to its dimensions.

Sources: Umicore, website on its silver bars; Heraeus, product pages of the silver bars; Heimerle + Meule, investment poster 2025; Valcambi, websites “Minted bars” and “Cast bars”; Pierer’s Universal‑Lexikon, volume 16, 1863, “Spratzen”; Meyers Großes Konversations‑Lexikon, 6th edition, volume 18, Leipzig 1909, “Silber”; Encyclopaedia Britannica, 1911, “Silver”; LBMA, Good Delivery List Rules, January 2026 (sections 2.1 and Annex D), and Good Delivery Rules, Technical Specifications; Gay‑Lussac, “Instruction sur l’essai des matières d’argent par la voie humide”, Paris 1832, according to the catalogue of the Wellcome Collection and the Dictionary of Scientific Biography; J. Volhard, Journal für praktische Chemie 9, 1874; ISO 13756 and ISO 11427, 2024 edition; Augusta Raurica, Augster Blätter zur Römerzeit 10; product photos from the shop; all accessed in October 2026. Images: silver bar with Hittite hieroglyphs, The Metropolitan Museum of Art, New York, 1989.281.16, public domain; cupels and cupel mould, woodcut from Lazarus Ercker’s book on assaying, printed in 1629, Deutsche Fotothek, public domain; seven bars from the shop’s product photos on a background generated with AI; mould and charcoal powder generated with AI.

Five kilograms of pure fine silver in a single, compact form: the 5 kg silver bar is one of the most impressive physical investment products on the precious metals market. Anyone holding this heavyweight for the first time immediately senses what many investors value about silver: tangible, real asset value instead of a mere number on a screen. This guide explains the characteristics, manufacturers, tax treatment, storage and resale of the 5,000-gram bar and places it in context relative to other denominations.

The 5 kg silver bar as an investment

A 5 kg silver bar combines 5,000 grams of silver with a fineness of at least 999/1,000 in a convenient format. It therefore appeals to investors who want to convert larger sums efficiently into physical precious metal without spreading the value across many small units. The decisive economic advantage lies in the favourable ratio between material value and production costs: the larger the bar, the lower the percentage premium above the pure spot price. For the same amount of silver, this size therefore involves a noticeably lower premium than numerous small units.

Silver unites two roles in a single metal: it is simultaneously an investment asset and an industrial raw material. Hardly any other element conducts electricity and heat better, and hardly any reflects light more strongly. These very physical properties make silver indispensable for future technologies such as photovoltaics, electronics and medical technology. Anyone looking into the raw material in general will find the entire range, from one-gram pieces to large bars, in the overarching category silver bars.

Production, fineness and appearance

5 kg silver bars are almost always produced using the casting method. In this process, liquid fine silver is poured into a mould and cools into a solid bar with a slightly irregular, lively surface, the typical appearance of a cast piece. In contrast to minted small bars, this creates a characterful look that many collectors and investors prefer, especially for large units. Dimensions vary depending on the manufacturer, but for a 5,000-gram bar they typically range from around 20 to 25 centimetres in length. Each bar bears an individual serial number, the manufacturer's mark, the weight designation of 5,000 g and the fineness.

Fineness and quality standards

The fineness is 999.0/1,000, placing it at the highest investment level. Bars from renowned producers are generally certified to the standards of the LBMA (London Bullion Market Association), a globally recognised seal of quality that documents purity and processing and facilitates international trade. Brand-new bars in Brilliant Uncirculated (BU) condition are delivered sealed for protection and come with a certificate of authenticity from reputable specialist dealers such as Kettner Edelmetalle.

Manufacturers and brands

The origin of a bar significantly affects its later tradability. Bars from established refineries enjoy international recognition and can be sold worldwide without elaborate re-verification. Among the best-known names in the field of 5-kilogram bars are:

  • Heraeus: a traditional German group whose bars are among the most sought-after in the world. More about the producer at Heraeus.
  • Umicore: a Belgian precious metals processor with high manufacturing quality; see Umicore.
  • Degussa: a firmly established brand name in the German precious metals trade.
  • Argor-Heraeus: a Swiss mint, sought after among other things for minted bars; more at Argor-Heraeus.

Since the availability of individual brands fluctuates, 5 kg silver bars are frequently offered in a variant described as various manufacturers. The material value remains identical in every case: what matters is the certified fineness, not the logo. Anyone who particularly values a specific mint will find suitable ranges in the overview of all manufacturers.

Minted bars and enhanced variants

Alongside the classic cast bar, there is a special variant: the minted bar. These are bar-shaped mintings given a face value by a sovereign issuing country, such as Niue, Fiji or the Cook Islands, and are therefore legally considered coins. Popular designs such as the turtle combine pure material value with collector appeal. The full range of this special form can be found under minted bars as well as in the related category coin bars.

In addition, there are enhanced silver bars that are visually upgraded through partial gilding, special surface treatment or elaborate relief work. These appeal to investors who want to combine tangible asset value with a decorative character. Anyone interested in these versions will find them in the category enhanced silver bars. For purely investment-oriented purchases, however, the plain 999 cast bar remains the most cost-effective choice, since enhanced pieces carry an additional surcharge for the design.

Tax treatment of silver bars

Unlike investment gold, silver bars are subject to VAT. In Germany, the standard VAT rate applies on purchase and is already included in the final price. This is one of the reasons why larger denominations such as the 5-kilogram bar are attractive: anyone who wants to build up a larger silver position anyway reduces part of the total cost through the low premium.

Tax note

For private individuals, profits from the sale of physical silver bars are generally tax-free after the one-year holding period pursuant to Section 23 of the German Income Tax Act (EStG) has elapsed. This does not constitute tax advice: for your individual situation, we recommend consulting a tax advisor.

Anyone who wants to make broader use of the tax advantages of precious metals should consider silver within the context of an overall strategy and, where appropriate, combine it with gold positions. The category inflation hedge offers suggestions on this.

Storage and handling

A 5 kg silver bar is a solid object that should be stored securely. For home storage, a firmly anchored, high-quality safe is suitable; alternatively, a bank safe deposit box is recommended. Since silver reacts more sensitively to environmental influences than gold, protection against moisture and sulphur-containing air plays a role: both can lead to a dark patina over time. This tarnish layer does not reduce the material value, but for investment-oriented storage it can be avoided by keeping the original sealing intact.

Important basic rules for storage:

  • Leave the bar in its original sealing wherever possible to protect the surface.
  • Keep the certificate of authenticity separately and securely; it makes a later sale easier.
  • For larger holdings, check your insurance cover; home contents insurance often only covers precious metals to a limited extent.
  • Prefer a dry, temperature-stable environment.

Suitable accessories for the secure storage of smaller accompanying positions can be found in the category coin cases and further accessories.

Resale and liquidity

When it comes to buy-back, size plays a dual role. On one hand, a bar of renowned origin can be sold without difficulty to banks and precious metals dealers thanks to its international recognition. On the other hand, a 5-kilogram bar ties up the value in a single unit: a partial sale is not possible. Anyone who expects to want to free up smaller amounts in the future would do well to combine this heavyweight with more manageable formats.

A large bar lowers the purchase cost, smaller units increase flexibility when selling: the smart mix makes the difference.

For a balanced allocation, the 1 kg silver bar and the 500 g silver bar are suitable additions. Anyone wishing to divide holdings even more finely can additionally turn to 100 g silver bars. At the upper end of the range, the 15 kg silver bar represents an even larger alternative for maximum value density.

5 kg bars compared to other denominations

The choice of the right size depends on the investment goal. The following overview classifies the common formats:

Format Strength Suitability
5 kg Low premium, high value density Larger investment amounts, long-term wealth preservation
1 kg Good compromise between price and divisibility Solid core position
100-500 g Flexibly tradable Gradual sale, medium amounts
1 oz - 50 g Highest flexibility, higher premium Small amounts, means of exchange

For very small, flexible units, it is worth looking at the 50 g silver bar or the 1 oz silver bar. Anyone who prefers to hold silver in coin form will find world-famous investment classics in the Maple Leaf silver coins and the Vienna Philharmonic.

Silver as a building block of wealth preservation

Paper money loses purchasing power over the decades, whereas silver has outlasted currency reforms and crises over millennia. As a tangible asset with its own intrinsic value, physical silver is independent of a bank's creditworthiness or a central bank's decisions. For many investors, this is precisely the emotional core: a piece of real substance that one can hold in one's hands, store and pass on to the next generation. The 5 kg bar is perhaps the most impressive statement of this attitude.

At the same time, industrial demand provides a foundation that purely monetary investments lack: even in economically difficult periods, the solar industry, electronics and medical technology require large quantities of silver. Anyone who views silver as part of broad protection would do well to complement it with positions from the area of retirement provision as well as physical gold for maximum diversification.

Frequently asked questions about 5 kg silver bars

Why is a 5 kg silver bar worthwhile compared with smaller denominations? +

Larger bars have a lower percentage premium on the silver price, because production and distribution costs are spread over more material. For the same amount of silver, you therefore pay a lower premium in the 5,000-gram size than with many small units. The disadvantage: a partial sale is not possible, since the value is tied up in a single unit.

What fineness does a 5 kg silver bar have? +

5 kg silver bars have a fineness of at least 999.0/1,000, i.e. pure fine silver. Bars from renowned manufacturers are additionally certified to LBMA standards, which facilitates international tradability.

Must VAT be paid when buying silver bars? +

Yes. Unlike investment gold, silver bars are subject to VAT in Germany; VAT is already included in the final price. However, profits from a later sale are generally tax-free for private individuals once the one-year holding period has elapsed.

What is the best way to store 5 kg silver bars? +

It is advisable to store them in their original sealing in an anchored safe or a bank safe deposit box. The sealing protects against moisture and sulphur-containing air, which can cause silver to develop a dark patina. The certificate of authenticity should be kept separately and securely.

Which manufacturer is the best choice for a 5 kg silver bar? +

For purely investment-oriented purchases, the origin from renowned refineries such as Heraeus, Umicore, Degussa or Argor-Heraeus is equivalent, as long as the fineness of 999.0 and LBMA certification are present. The material value is identical. Bars from these brands can be resold internationally without elaborate re-verification.

How do minted bars and enhanced silver bars differ from the classic bar? +

Minted bars are bar-shaped mintings with a sovereign face value and are legally considered coins; they combine material value with collector appeal. Enhanced silver bars are visually upgraded through partial gilding or special surfaces. Both variants carry a surcharge for the design: for purely investment purposes, the plain 999 cast bar remains the most cost-effective choice.

Get expert tips on wealth protection and be the first to hear about new products

Stay informed with product launches, financial news and exclusive offers. Sign up for our free newsletter today.

By entering your email address and clicking the "Submit" button, you give the following consent: "I agree to be informed by email about new products, financial news and exclusive offers, and therefore consent to the processing of my email address for the purpose of sending the newsletter. I can revoke this consent at any time without giving reasons, with effect for the future. The lawfulness of processing carried out prior to revocation remains unaffected."