300,000
Customers
Secure
shipping
LIVE

Buy 1 oz Silver Bars

Where minting stops.

Silver bars range from a few grams to about 31 kilograms. Between 10 grams and 15 kilograms, the small ones are usually minted and the large ones cast. Where one stops and the other begins, each house decides for itself.

Seven silver bars on dark slate, seen from above: on the left two long cast bars from Heraeus, on the right smaller bars down to a small square of one ounce
Cast and minted, at the same scale. Left, Heraeus 15 and 5 kg; top right, Heimerle + Meule 1 kg and Heraeus 500 g; bottom right, Umicore 250 g, a minted Umicore bar of 100 g and Heimerle + Meule 1 ounce. Bars: product photos from the shop, background generated with AI.

Umicore mints its silver bars from 10 to 100 grams. From 250 grams on, the house casts them, right up to 15 kilograms.

At Heraeus, the line falls in the same place. There, the ounce and 100 grams are minted, while 250 and 500 grams and 1, 5 and 15 kilograms are cast.

Other houses draw the line somewhere else entirely. Heimerle + Meule already casts the ounce, a small square with sides of 23.5 millimetres. Valcambi still mints the kilo, 130 millimetres long and 11.2 millimetres thick.

The larger the bar, the more likely it is cast.

How far each house mints

Sizes according to the makers, for Heraeus only the sizes the house itself lists; the minted ounce from Heimerle + Meule according to its bar in the shop. On the axis, it is as far from 10 to 100 grams as from 100 grams to 1 kilogram.

An empty mould of dark cast iron, open at the top, on a workbench, beside it a scoop of black charcoal powder
An open cast-iron mould and a scoop of charcoal powder. Image generated with AI.

Why molten silver shuns the air.

When pure silver melts, it takes up oxygen from the air. As it solidifies, the oxygen escapes again, and that can happen violently. Old encyclopaedias call it spitting.

“When melted in contact with air, pure silver absorbs a great deal of oxygen, which, however, escapes at the moment of solidification …”

Pierer’s Universal‑Lexikon, volume 16, 1863, entry “Spratzen”, translated

In doing so, the oxygen breaks through the crust that has already set and drives out the silver that is still liquid, into a spongy mass from which beads of silver leap. That is how Pierer’s encyclopaedia describes it.

The chemist Gay‑Lussac caught the oxygen under a bell jar filled with water. He obtained twenty to thirty times the volume of the silver, Pierer reports. In 1911, the Encyclopaedia Britannica gives twenty times. These are figures from encyclopaedias of 1863 and 1911, not present-day measurements.

The remedy is given in the same article: stir while the silver solidifies, “but best of all” sprinkle charcoal powder on it before it sets. According to Pierer, silver with 1 to 2 per cent copper does not spit, but pure silver does.

The oxygen is not entirely out of the picture. When a refinery on the London list assays its silver with a spectrograph today, oxygen and nitrogen expressly count as silver.

What happens as it solidifies

Diagram after the description in Pierer’s Universal‑Lexikon of 1863, not to scale.

Large cast silver bar from Heraeus, seen at an angle from above: the sides taper towards the bottom, and the top face is uneven
A cast 15‑kilogram bar from Heraeus: wider at the top than at the bottom. Product photo from the shop.

The dip in the top face.

Silver contracts strongly as it solidifies, the Meyers encyclopaedia of 1909 writes. On a cast bar, this shows on top: the top face can sink slightly in the middle, and rings from cooling can appear as well.

“Excessive shrinkage (i.e. the concavity of the top face of the Bar and any concentric cooling rings) must not significantly affect the clarity of the Bar marks or the safe stacking of the Bars.”

LBMA, Good Delivery Rules, Technical Specifications, section 2.1.4

The LBMA is the association of the London precious metals market. Its rules are written for the large bars of this market. They show what happens when silver is cast.

Silver has rules of its own there. A little hammering of the surface is allowed; for gold, at most the smoothing of a sharp burr. And closed moulds have been banned for silver since 2008, mainly because hidden cavities can form in them.

Cast bars are wider at the top than at the bottom. On the 15‑kilogram bar from Umicore, the top face measures about 235 by 100 millimetres and the bottom 210 by 80, with a height of 75 millimetres. For its silver bars, the LBMA requires a slope of 5 to 15 degrees, so that they are easy to grip.

Calculated from Umicore’s dimensions, the sides of its cast bars slope at about 6 to 10 degrees.

A cast bar shows on its top face how it solidified.

Four bars in cross-section, at the same scale

Dimensions from Umicore. In gold, the top face, the dip in it only suggested: its depth has not been measured. The slope is calculated from the top and bottom widths and the height.

Woodcut: at the top, cupels set one on top of another and the two-part mould in which they were pressed, at the bottom four assay cupels in decreasing size
Cupels and the mould in which they were pressed. Woodcut from Lazarus Ercker’s book on assaying, printed in 1629. Deutsche Fotothek, detail, public domain.

Silver is assayed differently from gold.

For gold, the LBMA requires its referee laboratory to carry out the fire assay, at least six times. For silver, the laboratory measures what is not silver and subtracts it from 1,000 parts.

“In the case of silver, the Referee will normally use one or other spectrographic analysis method and determine the silver assay by difference (with dissolved gases such as oxygen counting as silver).”

LBMA, Good Delivery List Rules, January 2026, Annex D, section 2.3

These are the rules for the refineries on the London list. They show how differently the two metals are assayed.

For a long time, silver was assayed in fire, in small dishes called cupels. In 1832, the French mint commission published instructions by Gay‑Lussac, the same man who had caught the oxygen in silver. After that, it could also be done “by the wet way”: the silver is precipitated with a solution of common salt instead of being assayed in fire in the cupel.

In 1874, Jacob Volhard described another wet method, with thiocyanate instead of common salt.

The common salt assay lives on in the standards. ISO 13756 determines silver in jewellery and precious metals with sodium or potassium chloride, ISO 11427 with potassium bromide, both today in the edition of 2024 and for silver contents of 100 to 999 parts per thousand. For higher contents, both name spectroscopy by difference.

With silver, the rest is what counts: 1,000 parts minus everything foreign.

The silver content by difference

According to the LBMA rules of January 2026. The foreign share is drawn greatly enlarged.

Three pounds, stamped in.

Stamping the weight onto the bar is an old practice. The silver treasure of Kaiseraugst in Switzerland includes a bar from shortly after AD 350. Punched into it is P III, three Roman pounds.

Flat, irregularly shaped silver bar, darkly tarnished, with fine incised signs at the top right
Much older still: a silver bar with Hittite hieroglyphs, 14th to 13th century BC. The Metropolitan Museum of Art, New York, public domain.

The bar measures 12.3 by 7.8 centimetres and is 1 centimetre thick. It weighs 947.8 grams, which corresponds to three Roman pounds.

Beside it are two small stamps reading GRONOPI, probably the name of the official in charge, and a round stamp with the bust and name of the Emperor Magnentius.

A kilo bar of today weighs almost the same, yet has a different shape. The cast kilo bar from Heraeus measures 111 by 51 millimetres and is 21 millimetres thick, more than twice as thick as the Roman bar.

Much older still is a silver bar with Hittite hieroglyphs in the Metropolitan Museum in New York, from the 14th to 13th century BC.

More than 1,650 years ago, the weight was already on the bar.

Three Roman pounds beside two kilo bars

Dimensions: Augusta Raurica, Augster Blätter zur Römerzeit 10, and the makers. All three from above at the same scale, the kilo bars as product photos from the shop, the Roman bar drawn as an outline to its dimensions.

Sources: Umicore, website on its silver bars; Heraeus, product pages of the silver bars; Heimerle + Meule, investment poster 2025; Valcambi, websites “Minted bars” and “Cast bars”; Pierer’s Universal‑Lexikon, volume 16, 1863, “Spratzen”; Meyers Großes Konversations‑Lexikon, 6th edition, volume 18, Leipzig 1909, “Silber”; Encyclopaedia Britannica, 1911, “Silver”; LBMA, Good Delivery List Rules, January 2026 (sections 2.1 and Annex D), and Good Delivery Rules, Technical Specifications; Gay‑Lussac, “Instruction sur l’essai des matières d’argent par la voie humide”, Paris 1832, according to the catalogue of the Wellcome Collection and the Dictionary of Scientific Biography; J. Volhard, Journal für praktische Chemie 9, 1874; ISO 13756 and ISO 11427, 2024 edition; Augusta Raurica, Augster Blätter zur Römerzeit 10; product photos from the shop; all accessed in October 2026. Images: silver bar with Hittite hieroglyphs, The Metropolitan Museum of Art, New York, 1989.281.16, public domain; cupels and cupel mould, woodcut from Lazarus Ercker’s book on assaying, printed in 1629, Deutsche Fotothek, public domain; seven bars from the shop’s product photos on a background generated with AI; mould and charcoal powder generated with AI.

Small, standardised and for many the first step into the world of physical precious metals: the 1 oz silver bar combines a manageable entry sum with the reassuring feeling of holding genuine fine silver in your hand. A troy ounce corresponds to exactly 31.1 grams of pure silver: compact enough to collect gradually, yet large enough to represent a visible monetary value. The following sections cover history and production, fineness and denominations, authenticity, tax particulars, storage, and the question of who benefits most from this small bar.

What defines a 1 oz silver bar

A 1 oz silver bar is usually made of 999 or 999.9 fine silver and weighs one troy ounce, i.e. 31.1035 grams. This makes it the smallest widely available bar unit in the silver segment and a natural entry point for anyone investing in physical silver for the first time. The low price per unit makes it attractive for beginners and small investors who want to build their wealth step by step.

Unlike a 100-gram bar or even a kilo bar, the 1-ounce bar can be sold on flexibly without having to liquidate a larger holding all at once. Those who value liquidity therefore like to split their silver into many small units. This divisibility is one of the main reasons why the ounce size is so popular.

A look at the complete silver bar overview shows just how wide the spectrum is: from the delicate smallest bars to massive five-kilo blocks. The 1 oz silver bar stands at the beginning of this range, which is precisely why it is the entry point for so many people.

Production: struck, cast and as minted bars

Silver bars are produced in different ways, and this diversity is particularly evident in the ounce size. The choice of method influences appearance, feel and, in some cases, collector value.

Struck bars

In the most common process, a silver blank is struck under high pressure. This produces a clean, often ribbed edge that protects the edges and prevents the precious metal from flaking off. Struck ounce bars carry precise designs and fine serial numbers and look particularly refined thanks to their smooth surfaces. Because the striking process is more elaborate for the angular bar shape than for round coins, these pieces are ideally suited as a high-quality gift.

Cast bars

In casting, liquid silver is poured into a mould and solidifies there. The result is a rustic bar with an irregular surface and individual character: each piece is a one-off. Collectors appreciate this raw, authentic look, which recalls the classic image of precious metal.

Minted bars

A special form are minted bars, which are struck as official legal tender of an issuing country and carry a printed face value. They combine the rectangular bar shape with the status of a coin and are particularly sought after by collectors. For comparison, the classic silver coins offer the round alternative to the angular bar.

Mehrere 1 oz Silberbarren aus Feinsilber auf dunklem Schiefer, geprägt und gegossen, warmes Licht
Whether struck or cast: 1-ounce silver bars come in a wide variety of designs made of pure fine silver.

Manufacturers and popular designs

The quality of a bar depends largely on the mint. Renowned refineries and mints guarantee fineness and workmanship. Among the best-known manufacturers of 1 oz silver bars are:

  • PAMP Suisse: a traditional Swiss house known for elaborately designed motif bars.
  • Perth Mint: Australia's state mint, known for animal-themed design series.
  • Royal Canadian Mint: Canadian mint offering high fineness of up to 999.9.
  • Heraeus and other German houses that stand for classic investment products.

Alongside plain investment bars, there is a great variety of motif bars: Nordic gods, animal depictions, historical replicas or limited year-of-issue editions. These pieces combine the material value of fine silver with a design appeal that goes far beyond pure investment. Anyone wishing to compare designs across different metals will find inspiration in the 1 oz gold bars as the more precious counterpart.

Fineness, dimensions and authenticity

The fineness indicates how pure the silver used is. Investment bars typically reach 999/1,000 (often referred to as "three nines") or even 999.9. On the surface, alongside the manufacturer's logo, the weight, the fineness, and, on struck pieces, an individual serial number are usually stamped.

Authenticity can be assessed using several characteristics. The key checkpoints at a glance:

  1. Weight: A calibrated precision scale should show exactly 31.1 grams.
  2. Dimensions: The length, width and thickness match the manufacturer's specifications.
  3. Magnet test: Silver is not magnetic, a magnet should not stick to it.
  4. Sound and appearance: Fine silver has a characteristic bright ring and a typical colour.
  5. Certificate and packaging: Many bars come in a sealed protective capsule or a blister pack with a certificate of authenticity.

At Kettner Edelmetalle, every precious metal item undergoes an ISO-compliant authenticity verification before leaving the high-security vault. This ensures that investors receive verified goods of impeccable fineness.

Tax particulars for silver

An important difference compared with gold: while investment gold is exempt from VAT in Germany, silver is generally subject to VAT. Bars are, as a rule, subject to the standard tax rate, whereas certain imported silver coins can be more favourable under the so-called margin scheme taxation.

Tax note

Silver bars are traded in Germany at the standard VAT rate. After a holding period of one year, capital gains for private investors are generally tax-free. This is general information and does not replace professional tax advice.

Anyone factoring tax considerations into their decision often compares the silver bar with silver bullion coins or looks towards tax-privileged investment gold. The right mix depends on personal objectives.

Storage and preservation of value

Silver reacts more sensitively to environmental influences than gold and can tarnish on contact with air and moisture. Proper storage is therefore crucial for preserving the value of a 1 oz silver bar. Airtight coin capsules and protective coin cases, which also allow larger collections to be kept tidily, have proven effective.

A certified safe is suitable for secure storage at home, or, for larger holdings, a bank safe deposit box. It is important not to damage the original packaging if at all possible, as an intact protective capsule preserves the resale value. Anyone wishing to keep their bars as an elegant gift will find suitable presentation solutions in the accessories range.

Who the 1 oz silver bar is suitable for

The small bar appeals to very different people, from the cautious saver to the passionate collector. Typical target groups include:

  • Small investors who want to start with a low capital outlay.
  • Beginners purchasing physical precious metal for the first time.
  • Collectors who focus on motif bars and limited editions.
  • Investors focused on diversification who want to spread their wealth broadly.

Anyone who invests small amounts regularly can build up a personal holding with the ounce size without overstretching their finances. A sensibly structured portfolio can also be grown gradually through savings plan products. Anyone specifically aiming for crisis resilience should also take a look at the silver investor packages, which bundle several units together.

A silver bar is more than metal: it is tangible provision that you can build up piece by piece, right in your own hands.

Frequently asked questions about 1 oz silver bars

How many grams does a 1 oz silver bar weigh? +

A troy ounce corresponds to exactly 31.1035 grams of pure silver. A 1 oz silver bar therefore contains around 31.1 grams of fine silver, usually with a fineness of 999 or 999.9.

What is the difference between a struck and a cast silver bar? +

Struck bars are produced under high pressure and look particularly refined with their smooth surfaces and fine designs. Cast bars are poured from liquid silver, have a rustic surface and are popular with collectors as one-off pieces.

Is VAT charged when buying 1 oz silver bars? +

Yes, silver bars are generally traded in Germany at the standard VAT rate. Unlike VAT-exempt investment gold, the tax is included in the price for silver. After a holding period of one year, private capital gains are generally tax-free.

Is a 1 oz silver bar worthwhile, or is a larger bar the better choice? +

Larger bars, such as a 250-gram or kilo bar, often have a lower premium per gram. In return, the ounce size offers more flexibility when reselling, since partial amounts can be sold more easily. Many investors therefore combine both sizes.

How do I check the authenticity of a silver bar? +

The most important characteristics include the exact weight, the correct dimensions, the non-magnetic nature of silver, and a certificate of authenticity in the original packaging. Verified goods from an ISO-compliant authenticity verification provide additional security.

What is the best way to store 1 oz silver bars? +

Silver can tarnish, so airtight storage in coin capsules or coin cases is recommended. For larger holdings, a certified safe or a bank safe deposit box is suitable. The original protective capsule should remain undamaged as far as possible in order to preserve the resale value.

Get expert tips on wealth protection and be the first to hear about new products

Stay informed with product launches, financial news and exclusive offers. Sign up for our free newsletter today.

By entering your email address and clicking the "Submit" button, you give the following consent: "I agree to be informed by email about new products, financial news and exclusive offers, and therefore consent to the processing of my email address for the purpose of sending the newsletter. I can revoke this consent at any time without giving reasons, with effect for the future. The lawfulness of processing carried out prior to revocation remains unaffected."