Buy 1 kg Silver Bars
- to
- In stock
Silver bars with a fine weight of one kilogram are particularly popular and are among the best-selling silver products. The 1-kilo bars are easy to stack and fit neatly into any safe deposit box or safe. In addition, compared to even larger units, such as the 5- or 15-kilogram silver bars, the premiums are only marginally higher.
1 kg Silver Bar (various manufacturers)
1 kg Silver StoneX Minted Bar
1 kg Silver Bar Heraeus
1 kg Silver Bar Heimerle und Meule (cast)
1 kg Silver Bar Umicore
1 kg Silver Famous Bullion Giants 2026 (Mintage: 199 | partially gold-plated | Prooflike)
1 kg Silver Fiji Minted Bar (Argor Heraeus)
1 kg Silver Bar Stone X
1 kg Silver Bar USSR Vintage (cast)
1 kg Cook Islands Coin Bar (in Can)
1kg Silver Cook Islands Minted Bar
1 kg Silver Tiffany Art Portale Milan and Prague 2026 (Mintage: 77 | Antique Finish)
1 kg Silver Niue Minted Bar Argor Heraeus
1 kg Silver Banknote Minted Bar Niue 2025 (Mintage: 1,000)
1 kg Silver Bar Nadir
1 kg Silver Minted Bar Niue Owl
1 kg Silver Bar Germania Mint
100 x 10g Silver Cowrie Shell Bar Bag
1 kg Silver Banknote Minted Bar Niue 2024 (Mintage: 5,000)
1 kg Silver Yellowstone Topography 2026 (Mintage: 77 | Ultra Deep Relief | Proof)
1 kg Silver Minted Bar Umicore Andorra
Where minting stops.
Silver bars range from a few grams to about 31 kilograms. Between 10 grams and 15 kilograms, the small ones are usually minted and the large ones cast. Where one stops and the other begins, each house decides for itself.

Umicore mints its silver bars from 10 to 100 grams. From 250 grams on, the house casts them, right up to 15 kilograms.
At Heraeus, the line falls in the same place. There, the ounce and 100 grams are minted, while 250 and 500 grams and 1, 5 and 15 kilograms are cast.
Other houses draw the line somewhere else entirely. Heimerle + Meule already casts the ounce, a small square with sides of 23.5 millimetres. Valcambi still mints the kilo, 130 millimetres long and 11.2 millimetres thick.
The larger the bar, the more likely it is cast.
Sizes according to the makers, for Heraeus only the sizes the house itself lists; the minted ounce from Heimerle + Meule according to its bar in the shop. On the axis, it is as far from 10 to 100 grams as from 100 grams to 1 kilogram.

Why molten silver shuns the air.
When pure silver melts, it takes up oxygen from the air. As it solidifies, the oxygen escapes again, and that can happen violently. Old encyclopaedias call it spitting.
“When melted in contact with air, pure silver absorbs a great deal of oxygen, which, however, escapes at the moment of solidification …”
Pierer’s Universal‑Lexikon, volume 16, 1863, entry “Spratzen”, translated
In doing so, the oxygen breaks through the crust that has already set and drives out the silver that is still liquid, into a spongy mass from which beads of silver leap. That is how Pierer’s encyclopaedia describes it.
The chemist Gay‑Lussac caught the oxygen under a bell jar filled with water. He obtained twenty to thirty times the volume of the silver, Pierer reports. In 1911, the Encyclopaedia Britannica gives twenty times. These are figures from encyclopaedias of 1863 and 1911, not present-day measurements.
The remedy is given in the same article: stir while the silver solidifies, “but best of all” sprinkle charcoal powder on it before it sets. According to Pierer, silver with 1 to 2 per cent copper does not spit, but pure silver does.
The oxygen is not entirely out of the picture. When a refinery on the London list assays its silver with a spectrograph today, oxygen and nitrogen expressly count as silver.
Diagram after the description in Pierer’s Universal‑Lexikon of 1863, not to scale.

The dip in the top face.
Silver contracts strongly as it solidifies, the Meyers encyclopaedia of 1909 writes. On a cast bar, this shows on top: the top face can sink slightly in the middle, and rings from cooling can appear as well.
“Excessive shrinkage (i.e. the concavity of the top face of the Bar and any concentric cooling rings) must not significantly affect the clarity of the Bar marks or the safe stacking of the Bars.”
LBMA, Good Delivery Rules, Technical Specifications, section 2.1.4
The LBMA is the association of the London precious metals market. Its rules are written for the large bars of this market. They show what happens when silver is cast.
Silver has rules of its own there. A little hammering of the surface is allowed; for gold, at most the smoothing of a sharp burr. And closed moulds have been banned for silver since 2008, mainly because hidden cavities can form in them.
Cast bars are wider at the top than at the bottom. On the 15‑kilogram bar from Umicore, the top face measures about 235 by 100 millimetres and the bottom 210 by 80, with a height of 75 millimetres. For its silver bars, the LBMA requires a slope of 5 to 15 degrees, so that they are easy to grip.
Calculated from Umicore’s dimensions, the sides of its cast bars slope at about 6 to 10 degrees.
A cast bar shows on its top face how it solidified.
Dimensions from Umicore. In gold, the top face, the dip in it only suggested: its depth has not been measured. The slope is calculated from the top and bottom widths and the height.

Silver is assayed differently from gold.
For gold, the LBMA requires its referee laboratory to carry out the fire assay, at least six times. For silver, the laboratory measures what is not silver and subtracts it from 1,000 parts.
“In the case of silver, the Referee will normally use one or other spectrographic analysis method and determine the silver assay by difference (with dissolved gases such as oxygen counting as silver).”
LBMA, Good Delivery List Rules, January 2026, Annex D, section 2.3
These are the rules for the refineries on the London list. They show how differently the two metals are assayed.
For a long time, silver was assayed in fire, in small dishes called cupels. In 1832, the French mint commission published instructions by Gay‑Lussac, the same man who had caught the oxygen in silver. After that, it could also be done “by the wet way”: the silver is precipitated with a solution of common salt instead of being assayed in fire in the cupel.
In 1874, Jacob Volhard described another wet method, with thiocyanate instead of common salt.
The common salt assay lives on in the standards. ISO 13756 determines silver in jewellery and precious metals with sodium or potassium chloride, ISO 11427 with potassium bromide, both today in the edition of 2024 and for silver contents of 100 to 999 parts per thousand. For higher contents, both name spectroscopy by difference.
With silver, the rest is what counts: 1,000 parts minus everything foreign.
According to the LBMA rules of January 2026. The foreign share is drawn greatly enlarged.
Three pounds, stamped in.
Stamping the weight onto the bar is an old practice. The silver treasure of Kaiseraugst in Switzerland includes a bar from shortly after AD 350. Punched into it is P III, three Roman pounds.

The bar measures 12.3 by 7.8 centimetres and is 1 centimetre thick. It weighs 947.8 grams, which corresponds to three Roman pounds.
Beside it are two small stamps reading GRONOPI, probably the name of the official in charge, and a round stamp with the bust and name of the Emperor Magnentius.
A kilo bar of today weighs almost the same, yet has a different shape. The cast kilo bar from Heraeus measures 111 by 51 millimetres and is 21 millimetres thick, more than twice as thick as the Roman bar.
Much older still is a silver bar with Hittite hieroglyphs in the Metropolitan Museum in New York, from the 14th to 13th century BC.
More than 1,650 years ago, the weight was already on the bar.
Dimensions: Augusta Raurica, Augster Blätter zur Römerzeit 10, and the makers. All three from above at the same scale, the kilo bars as product photos from the shop, the Roman bar drawn as an outline to its dimensions.
The 1 kg silver bar is considered the king's format among silver bars: no other weight combines a favourable price per gram, good tradability and convenient storage so evenly. A single bar bundles one thousand grams of fine silver into a compact ingot that can be stacked, verified and sold on at any time. The following sections cover fineness and production, the most important mints, price structure, tax particularities, proper storage, and the comparison with smaller and larger units.
The 1 kg Silver Bar as a Classic Silver Investment
Silver bars with a fine weight of one kilogram are among the best-selling silver products of all. The reason is simple: anyone wishing to own a larger quantity of silver without managing countless small units finds the ideal compromise in the 1,000-gram format. A bar of this size equals around 32.15 troy ounces and therefore represents a substantial position within a broadly diversified precious metals portfolio.
Within the silver bars category, the kilo bar format occupies a special position because it marks the transition between convenient denomination and large-volume investment. For investors who regularly invest a three- to four-figure sum in fine silver, the kilo bar is often the first choice: it is large enough for a low price per gram and at the same time small enough to remain flexible.
Fineness and Material Quality
The fineness of a classic 1 kg silver bar is 999/1,000 (99.9 percent). Many manufacturers now even offer a fineness of 999.9/1,000, which corresponds to almost complete purity. This high material quality is a key purchasing criterion, as it determines the pure silver content and thus the material value of the bar. On every reputable bar, the weight, fineness and manufacturer's hallmark are stamped or cast in, details that make later valuation and resale easier.
Cast or Struck: Two Production Methods
Depending on the manufacturer and refinery, 1 kg silver bars are produced using two fundamentally different methods. Both result in fully-fledged investment silver but differ in appearance and character.
- Cast bars are created by pouring liquid silver into a mould. They look rustic, often have a slightly irregular surface and are valued by collectors for their original, handcrafted character.
- Struck bars are stamped from rolled silver strip and struck under high pressure. They have smooth edges, clear contours and a uniform surface, often complemented by a serial number or a fine design.
Both variants are traded at the respective daily price and are equally suitable as an investment. Anyone who places particular value on a flawless appearance tends to choose the struck piece; anyone who likes the original bar character finds an appealing counterpart in cast bars. As a complement to the range, minted bars and coin strips are also available, combining the character of bars and coins.
Well-Known Manufacturers and LBMA Certification
The origin of a bar is decisive for its tradability. Among the most popular producers of 1-kilogram silver bars are LBMA-certified, long-established companies. The abbreviation LBMA stands for the London Bullion Market Association, whose Good Delivery List is recognised worldwide as a quality benchmark. Bars from these mints are bought back internationally without difficulty.
- Heraeus: German precious metals group with bars recognised worldwide
- Umicore: Belgian manufacturer with a long refining tradition
- Argor-Heraeus: Swiss refinery for high-purity bars
- Degussa: a name steeped in tradition with high brand recognition
- Heimerle und Meule: German refinery producing cast kilo bars
A bar from a well-known refinery can later be resold more easily and on better terms than a product of unknown origin. For this reason, experienced investors consistently pay attention to a reputable mint name when buying.
Price, Premium and the Silver Price
Silver bars have no face value. They are traded at the respective daily price, which is based on the international silver price, the so-called spot price, which is determined using data from the London Bullion Market Association. On top of the pure material value comes a surcharge, the so-called premium (minting surcharge), which covers the costs of production, distribution and trading.
The great advantage of the kilo bar lies precisely here: the larger the unit, the lower the premium per gram. A 1 kg bar is therefore significantly cheaper per gram than many smaller units such as a 100 g silver bar or a 50 g silver bar. Compared with the even larger 5 kg silver bars and 15 kg silver bars, however, the price-per-gram advantage is only slight: the kilo bar is therefore considered the most price-efficient format while still offering full flexibility.
Why the kilogram format is so popular
The 1 kg bar hits the optimal point between a low price per gram and good divisibility of assets. Anyone who holds several kilo bars instead of one large 15 kg ingot can sell individual pieces if needed without liquidating the entire position.
Tax Treatment of Silver Bars
Unlike investment gold, which is exempt from VAT in Germany, silver bars are generally subject to VAT. When buying bars domestically, the regular VAT rate applies. Silver coins can, under certain conditions, benefit from the more favourable margin scheme taxation, whereas bars are usually taxed in full, an aspect that should be considered when comparing bars and coins.
For private sales, the one-year holding period also applies: if the silver is held for longer than one year, any capital gain is, under current law, tax-free. This rule makes physical silver particularly attractive for long-term-oriented investors. Anyone wishing to diversify their capital in a targeted way will find bundled selections among the silver investor packages.
Note: This is general information and does not replace tax advice. Tax regulations may change.
Safekeeping and Storage
A 1 kg silver bar is compact and robust but requires considerably more space than its gold counterpart: silver is substantially more voluminous, because the silver price per gram is many times lower than that of the 1 kg gold bar. Anyone building up a larger quantity should plan for the space requirement from the outset.
Secure Storage at Home and in a Safe Deposit Box
The flat, even shape of kilo bars makes them particularly stackable: they can be stored space-savingly in a safe or bank safe deposit box. Protection against scratches and tarnishing is important for preserving value. Suitable accessories such as coin cassettes or robust coin cases help to store the bars neatly and protected. It is also important to keep the original packaging and any certificates, as they make later resale easier.
Who the 1 kg Silver Bar Is Suitable For
The kilogram format appeals to a broad audience, from the security-conscious saver to the experienced collector. Silver is traditionally regarded as a building block for inflation hedging and as a tangible asset that exists independently of the banking system.
- Savers and beginners who want to build up a larger silver position step by step while keeping an eye on a low price per gram.
- Long-term investors who hold physical silver as a complement to gold bars and coins in their portfolio.
- Collectors who value cast bars or special editions for their individual character.
Anyone wishing to remain more flexible and sell in smaller steps can alternatively turn to more convenient units such as the 500 g silver bar or the 250 g silver bar. Anyone who additionally places value on designs and collecting enjoyment will find an appealing complement in silver coins.
Silver is the precious metal of everyday life: affordable, tangible and proven as a store of value for centuries.
Frequently Asked Questions about 1 kg Silver Bars
What fineness does a 1 kg silver bar have? +
A classic 1 kg silver bar has a fineness of 999/1,000 (99.9 percent). Many manufacturers now even offer a fineness of 999.9/1,000. The weight and fineness are stamped or cast into the bar.
Why is the 1 kg silver bar so popular? +
The kilogram format offers a low price per gram while also providing good tradability and space-saving storage. Compared with smaller units, the premium per gram is significantly lower, while compared with 5 or 15 kg ingots the bar remains flexible and easier to resell.
Do you have to pay VAT when buying silver bars? +
Yes. Unlike investment gold, silver bars are subject to VAT in Germany. The regular VAT rate applies when buying. After the one-year holding period has elapsed, a private capital gain is, under current law, tax-free.
What is the difference between cast and struck silver bars? +
Cast bars are produced by pouring liquid silver into a mould and have a rustic appearance with an irregular surface. Struck bars are stamped and struck from rolled silver strip, giving them smooth edges and a uniform surface. Both are equally valid investment products.
How is the price of a 1 kg silver bar determined? +
Silver bars have no face value and are traded at the daily price. This is based on the international silver price, which is determined by the London Bullion Market Association (LBMA). In addition, there is a premium for production and trading, which is particularly low per gram for large bars.
Which manufacturers are recommended for 1 kg silver bars? +
Recommended are LBMA-certified, long-established companies such as Heraeus, Umicore, Argor-Heraeus, Degussa or Heimerle und Meule. Bars from these well-known refineries can later be resold more easily and on better terms.









































