310,000
Customers
Secure
shipping
LIVE

0.1 g Gold Bars

Products

The gram comes from water.

The gram was laid down in Paris, in the law of 18 Germinal, Year III, which by our calendar was 7 April 1795. Article 5 reads:

“Gramme, le poids absolu d’un volume d’eau pure égal au cube de la centième partie du mètre, et à la température de la glace fondante.”

Law of 18 Germinal an III (7 April 1795), Article 5

This means the weight of pure water in a cube with edges of one centimetre, at the temperature of melting ice. The kilogram was merely its multiple: Article 7 calls it the weight of a thousand grams.

Both weigh one gram.
  1. Water10 mm edge
  2. Gold15 × 8.7 mm

Both at the same scale. The cube shows the gram as defined by the law of 1795. Beside it is a bar of 1 gram by Heimerle + Meule, with the dimensions given by the maker.

Twenty drops of water from a standard dropper together weigh about one gram.

In Germany, the gram has applied since 1 January 1872, as laid down in the Maß‑ und Gewichtsordnung of 17 August 1868, the weights and measures act of the North German Confederation. Article 6 states: “The kilogram is divided into 1,000 grams”. And: “Half a kilogram is called the pound.”

From 1889, the measure was tied to a cylinder of platinum and iridium, the International Prototype of the Kilogram near Paris. The first General Conference on Weights and Measures resolved: “This prototype shall henceforth be considered as the unit of mass.” Germany’s copy, number 52, is kept under two glass bell jars at the Physikalisch‑Technische Bundesanstalt (PTB), the national metrology institute, in Braunschweig.

According to the PTB, the last comparisons showed that the difference between the prototype and its copies had grown to 50 micrograms, “about the same mass as the wing of a fly”. Since 20 May 2019, the kilogram has been tied to a constant of nature, the Planck constant.

Cylindrical brass weight with a knob on top
The first standard kilogram of the Netherlands, made in Paris in 1798. The plaque on its case reads: “Kilogramme conforme a la loi du 18 Germinal an 3 …”. When it was reweighed in 1847, it was 16 milligrams lighter than the new standard. Rijksmuseum Amsterdam, public domain.

Where gold is not weighed in grams.

The gram is not the measure for gold everywhere. In Vietnam, people count in lượng and chỉ. A government decree laid this down in 2012: one lượng is 37.5 grams, one chỉ 3.75 grams, both only for weighing gold and silver.

In Hong Kong, the Chinese Gold and Silver Exchange Society trades gold in taels. There, one tael is 37.429 grams.

The troy ounce, in which many coins and bars are weighed, is also built from a smaller measure, the grain: 480 grains make one troy ounce, and one grain weighs 64.79891 milligrams. This is set out in Handbook 44 of NIST, the U.S. National Institute of Standards and Technology.

Five measures for gold, in grams
  1. 1 gram Law of 17951 g
  2. 1 chỉ Vietnam3.75 g
  3. 1 troy oz 480 grains31.10 g
  4. 1 tael Hong Kong37.43 g
  5. 1 lượng Vietnam37.5 g

The values are given by Decree 86/2012 of the Vietnamese government, the Chinese Gold and Silver Exchange Society in Hong Kong and NIST. The troy ounce and the tael are rounded to two decimal places.

Copper weight shaped like a violin, with Chinese characters incised at the top
Chinese tael weight from the wreck of the East Indiaman “’t Vliegend Hart”, made between 1700 and 1735. Such weights were used to weigh gold and other valuables, according to the museum. Rijksmuseum Amsterdam, public domain.

Three quarters of a tonne of rock for one gram.

Gold that comes out of the ground today is usually invisible, locked away in the rock. In the second quarter of 2022, the ore processed by gold mines worldwide contained an average of 1.29 grams of gold per tonne. Metals Focus reports this in an article for the World Gold Council.

By calculation, one gram of gold is therefore contained in about 775 kilograms of ore, just over three quarters of a tonne.

One gram of gold in about 775 kilograms of ore
  • one tonne
  • about 775 kg of ore
  • 1 g gold

Diagram: the square stands for one tonne. Only the golden dot is not to scale. At the same scale, it would be smaller than a pixel.

Ordinary rock holds far less gold still. On average, the Earth’s crust contains 0.004 grams per tonne, according to the U.S. Geological Survey. By calculation, that would be 250 tonnes for one gram.

On the Witwatersrand in South Africa, about 5.87 billion tonnes of rock were mined and milled from 1886 to 2005. On average, they yielded 8.07 grams of gold per tonne.

Close‑up of gold ore: pale and grey pebbles in dark rock
Gold ore from the Witwatersrand. U.S. Geological Survey, public domain.

One gram of Rhine gold.

The Rhine carries gold too, in tiny flakes. The Federal Institute for Geosciences and Natural Resources (BGR) writes:

“In the Rhine, placer gold occurs almost exclusively in the form of the finest flakes up to 0.3 mm in diameter and 0.003‑0.005 mg in weight.”

Federal Institute for Geosciences and Natural Resources, Commodity Top News No. 30, 2009

By calculation, one gram of Rhine gold is therefore 200,000 to about 330,000 flakes.

A flake next to the same bar of 1 gram
  1. Flake0.3 mm
  2. 1 g bar15 × 8.7 mm

Both at the same scale. The fine circle only shows where the flake lies. The maximum size of the flakes is given by the Federal Institute for Geosciences and Natural Resources, the dimensions of the bar by Heimerle + Meule.

In 1960, a gravel works near Bruchhausen, south of Karlsruhe, separated 21.3 grams of gold from 50,000 cubic metres of gravel. By calculation, that makes about 2,350 cubic metres of gravel for one gram.

The gold panners had a rule of thumb: for panning to be worthwhile, a shovelful of sand had to contain 10 to 20 flakes near Strasbourg and at least 40 to 50 near Mannheim. Downstream, the flakes become ever finer.

In 1874, the Karlsruhe Mint received its last Rhine gold: 89.8 grams.

From strip to bar.

How fine gold becomes a small minted bar is described step by step in the reference work Gold Bars Worldwide, based on information from the Perth Mint in Australia. For this, the gold is rolled into a strip.

Before the blanking press runs, individual trial blanks are cut from the strip with a hand press and weighed. If one is too heavy, the strip goes through the rolling mill once more.

Then a press punches the blanks out of the strip, and every single one is weighed. Blanks that are too light or clearly too heavy go back into the melt, as does the webbing left over from the strip.

The blank is struck between two dies, while a ring, the collar, holds its shape. Sometimes it takes more than one strike.

Four steps to a bar
  1. Strip
  2. Blank
  3. Balance
  4. Dies

15,000bars of standard quality, at most, can be struck with one die. After about 5,000, it is usually repolished.

Diagram based on information from the Perth Mint.

Old black‑and‑white photograph: an empty hall with long tables, a small balance at every place, machines at the back
The coin adjusting room of the U.S. Mint in San Francisco: a balance at every place and, at the back, machines for counting the coins. Photograph taken between about 1870 and 1930. U.S. National Archives, public domain.
View 1 g gold bars
Sources: Law of 18 Germinal an III (7 April 1795), Articles 5 and 7, after the Digithèque MJP of the University of Perpignan; Maaß‑ und Gewichtsordnung für den Norddeutschen Bund of 17 August 1868, Articles 6 and 21 (Bundesgesetzblatt des Norddeutschen Bundes 1868, p. 473; the quotations are translated from the German); Physikalisch‑Technische Bundesanstalt (Das Kilogramm; Das Kilogramm, die Einheit der Masse; the quotation is translated from the German); Bureau International des Poids et Mesures (1st and 26th General Conference on Weights and Measures; the declaration of 1889 is quoted in the BIPM’s English wording); European Pharmacopoeia, 2.1.1 Droppers, after the 2024 draft of the Austrian Pharmacopoeia; Decree 86/2012/NĐ‑CP of the Government of Vietnam, Annex IV; Chinese Gold & Silver Exchange Society (Hong Kong); NIST Handbook 44, 2026 edition, Appendix C; World Gold Council (Gold Focus, 30 September 2022, after Metals Focus); U.S. Geological Survey (Mineral Commodity Profiles: Gold, 2005); M. Handley, Journal of the Southern African Institute of Mining and Metallurgy 123 (2023); Federal Institute for Geosciences and Natural Resources, BGR (Goldgewinnung in Deutschland, 2009; the quotation is translated from the German); Gold Bars Worldwide, based on information from the Perth Mint (How minted gold bars are manufactured, 2014); Heraeus, Argor‑Heraeus, Umicore, Valcambi and Heimerle + Meule (dimensions of the 1 g bars). Images: first standard kilogram of the Netherlands, 1798, and tael weight from the wreck of the “’t Vliegend Hart” (both Rijksmuseum Amsterdam, public domain), gold ore from the Witwatersrand (U.S. Geological Survey, public domain), coin adjusting room of the U.S. Mint in San Francisco (U.S. National Archives, public domain).

The 0.1 g gold bar is among the smallest regularly traded gold bars of all, making entry into physical gold possible with a minimal capital outlay. Despite its low fine weight of just one tenth of a gram, it is a fully-fledged gold bar made of 999.9 fine gold, struck by established refineries and usually securely packaged in a blister. This guide explains its characteristics, manufacture, authenticity features, tax treatment, storage, and the question of who this smallest denomination is suitable for.

The 0.1 g gold bar at a glance

A 0.1 g gold bar weighs one tenth of a gram and consists of fine gold with a fineness of 999.9 (24 carat). It therefore belongs to the family of the smallest gold bar denominations, positioned even below the 0.5 g gold bar and the 1 g gold bar. Due to its tiny dimensions, the bar wafer is practically always offered in a sealed protective packaging, a so-called blister, which also serves as a certificate of authenticity.

The appeal of this smallest denomination lies in its low entry threshold: anyone wishing to own physical gold without investing several hundred euros at once will find a tangible asset here. Such bars are often used as a gift, as a collector's item, or as a symbolic first step into buying gold. Within the entire gold bar category, the 0.1 gram format forms the lower end of the range.

Dimensions and physical properties

With a fine weight of 0.1 gram, the amount of pure gold is extremely small, by comparison: one tenth of a gram of gold roughly corresponds to the mass of a small drop of water. The bars are therefore struck as very thin, small wafers and only become manageable once enclosed in the surrounding blister. The packaging usually bears details of the manufacturer, fine weight and fineness, and protects the delicate gold wafer from deformation, scratches and soiling.

Manufacture: struck rather than cast

Gold bars are fundamentally produced in two ways: cast or minted (struck). Cast bars are made by pouring liquid gold into a mould and are found mainly in larger weights such as the 100 g gold bar or the 1 kg gold bar. Smallest bars such as the 0.1 gram format, by contrast, are invariably minted: a wafer is punched from a rolled gold strip and given a design, logo and inscription under high pressure.

The result is a clean, precise surface with clearly legible details. Minted bars appear particularly refined and are therefore also well suited as a gift. Renowned refineries and manufacturers such as Heimerle und Meule, Heraeus or Umicore stand for consistently high quality and internationally recognised minting.

Blister packaging

For smallest bars, the blister is more than just a sleeve. It seals the bar airtight and contains the most important data: fine weight, fineness of 999.9 and the name of the mint. As long as the seal remains intact, it is regarded as an important part of the authenticity documentation. For this reason, the bar should not be removed from the blister: an opened blister can reduce the resale value.

Comparing denominations: small, medium and large

Choosing the right denomination depends on the investment goal. Small units offer flexibility, large bars a better ratio of gold price to premium. The premium over the pure material value, that is, the share accounted for by manufacture, packaging and trading, is percentage-wise highest for very small bars and decreases as weight increases.

  • 0.1 g to 1 g: maximum divisibility and the lowest capital outlay, but the highest percentage premium. Ideal as a gift or as an entry point.
  • 2 g to 10 g: a good compromise between divisibility and price. See the 5 g gold bar and the 10 g gold bar.
  • 20 g to 100 g: a more favourable premium, popular for medium investment amounts, such as the 50 g gold bar.
  • 250 g to 1 kg: the best price-performance ratio per gram, but barely divisible.

An interesting intermediate solution is the CombiBar: a larger bar divided by perforations that can be separated into small one-gram units. Anyone who values divisibility without buying numerous individual bars will find these in the range of gold CombiBars.

Authenticity and quality features

Even with the smallest gold bar, authenticity plays a central role. The most important indicators are an intact blister seal, clean and sharp minting, and correct details on fine weight and fineness. With renowned manufacturers, the minted design and packaging are of consistent quality.

  1. Look for a recognised manufacturer: established refineries enjoy worldwide trust.
  2. Check the blister seal: intact and without any subsequent opening.
  3. Check the details of 999.9 fine gold and 0.1 g on the packaging.
  4. Make the purchase from a reputable, verified dealer who documents the origin.

Kettner Edelmetalle relies on an ISO-compliant authenticity verification and sources goods exclusively from certified suppliers, so that every bar is delivered in verified quality.

Tax treatment of investment gold

A key advantage of gold bars over other precious metals is their tax treatment. In Germany, investment gold is exempt from VAT under § 25c UStG, provided it meets the statutory minimum fineness of 995 parts per thousand, which the 0.1 g gold bar, at 999.9, clearly exceeds. The purchase is therefore made without VAT, unlike, for example, silver bars, which are subject to the margin scheme.

Tax note

Investment gold is exempt from VAT under § 25c UStG. If physical gold is held for longer than one year, any capital gain realised on sale is, under current law, tax-free. This information is provided for general guidance only and does not replace tax advice.

Anyone wishing to delve deeper into the topic of wealth protection will find further relevant categories on physical precious metals under inflation hedge and retirement provision.

Storage and safekeeping

Due to their small size, 0.1 gram bars can be stored particularly space-efficiently. It is important to leave the delicate gold wafer in its original blister and to protect it from mechanical stress. Various solutions are available for storing several small bars or a mixed collection.

  • Home storage: in a home safe or a can safe, discreet and accessible at any time.
  • Bank safe deposit box: greater security against theft, but ongoing costs and limited access.
  • Organisation systems: suitable coin cassettes and other accessories help to store blister bars sorted and protected.

Regardless of the storage location, it is advisable to keep the seal intact and to maintain an overview of your holdings.

Who is the 0.1 g gold bar suitable for?

This smallest denomination appeals to a broad target group. Beginners use it to own physical gold for the first time with a manageable budget. Gift-givers appreciate the symbolic value of a genuine gold bar, for example for a birth, christening or anniversary. And collectors are happy to add the smallest available formats to their holdings.

A gold bar does not need to be large to represent a genuine tangible asset: what matters is the fine gold it contains.

Anyone wishing to regularly save small amounts of gold can also consider entering via savings plan products or the next larger unit, the 1 g gold bar. For classic investment purposes with a better premium ratio, it is worth looking at the entire gold range.

Frequently asked questions about the 0.1 g gold bar

How much is a 0.1 g gold bar worth? +

The value results from the current gold price for one tenth of a gram of fine gold plus a premium for manufacture, packaging and trading. For very small bars, this premium is percentage-wise higher than for larger denominations.

What fineness does a 0.1 g gold bar have? +

Standard 0.1 gram bars consist of 999.9 fine gold, that is, pure gold with a fineness of 24 carat. This means they meet the requirements for classification as investment gold.

Is VAT charged on purchase? +

No. In Germany, investment gold is exempt from VAT under § 25c UStG, as its fineness is well above the statutory minimum of 995 parts per thousand. The purchase is therefore made without VAT.

Should the bar be removed from the blister? +

No. The sealed packaging protects the delicate gold wafer and serves as proof of authenticity, with details of fine weight, fineness and manufacturer. An opened blister can reduce the resale value.

Is a 0.1 g gold bar worthwhile as an investment? +

For pure wealth building, larger denominations offer a more favourable ratio of gold price to premium. The 0.1 g gold bar, on the other hand, scores as an entry point, gift or collector's item, with a minimal capital outlay and full divisibility.

Which manufacturers mint 0.1 g gold bars? +

Smallest bars come from established refineries such as Heimerle und Meule, Heraeus or Umicore. These manufacturers stand for verified quality and internationally recognised minting.

Get expert tips on wealth protection and be the first to hear about new products

Stay informed with product launches, financial news and exclusive offers. Sign up for our free newsletter today.

By entering your email address and clicking the "Submit" button, you give the following consent: "I agree to be informed by email about new products, financial news and exclusive offers, and therefore consent to the processing of my email address for the purpose of sending the newsletter. I can revoke this consent at any time without giving reasons, with effect for the future. The lawfulness of processing carried out prior to revocation remains unaffected."