300,000
Customers
Secure
shipping
LIVE

Partially Gold-Plated Coins

One elephant, three stages.

The elephant is the same on all three coins. What changes is the gold: from stage to stage, more of it lies on the silver.

Elephant 2026 without gold, reverse: elephant and crystal field all in silver
Elephant 2026, part‑gilded, reverse: elephant and rim in gold, the crystal field dark
Elephant 2026, gilded, reverse: the whole surface in gold
AI‑generated scene
  1. Stage 1Without goldMintage 1,000in a coin capsule
  2. Stage 2Gold elephant and rimMintage 250in a case
  3. Stage 3All goldMintage 250in a case

All three come from Kettner Edelmetalle: country of issue Liberia, face value 20 dollars, 1 ounce (31.1 g) of silver with a fineness of 999.9/1,000, 40 mm in diameter. On the first, the whole coin stays silver. On the second, the elephant and the rim are golden, and the crystal field behind them looks dark. On the third, the whole surface is golden. The photos are on the same scale, so ears, trunk and rim can be compared directly.

How thin a layer of gold is.

No mint whose information we have read states how thick the gold on a coin is. A report from 1946, however, shows the order of magnitude.

Each step ten times smallerExample from a report on gilded jewellery, 1946.0.49 mg of gold on 1 cm²

At the time, the American National Bureau of Standards described how gold layers on jewellery, watch cases and insignia can be measured. One example from the report: 0.00025 mm of gold, that is 250 nanometres. One square centimetre with this layer contains 0.49 mg of gold.

Our own calculation for comparison: 250 nanometres is one four‑hundredth of a sheet of paper. That is about 750 gold atoms stacked one on top of another.

Kiwi 2025, part‑gilded, reverse: gold ornamental ring with $2, in the centre two kiwis in black and grey
Kiwi 2025, part‑gildedKiwi 2025New Zealand Mint, 2 ounces2 ounces
New Zealand Mint, New Zealand, 2 dollars, 2 ounces (62.2 g) of silver, fineness 999/1,000, 50 mm; shown is the side with the kiwis.

From fire to electricity.

For a long time, metal was gilded in fire. In the 19th century, people learned to do it with electricity.

Engraving of a workshop: people at tables and at a hearth under a chimney hood, light falls through tall windows.
Engraving from the 18th century, “Doreur sur métaux”, gilder on metal; drawn by Bonaventure‑Louis Prévost. Paris Musées, Musée Carnavalet, Histoire de Paris, CC0

In fire gilding, an amalgam of gold and mercury was brushed onto the piece, which was then heated carefully until only the gold remained.

Up to 1840 plated silver goods were made only by rolling or soldering thin sheets of silver upon copper.

Dictionary of National Biography, 1889, vol. 17, “Elkington, George Richards”

From 1836 the Elkingtons applied for patents. The liquid best suited to electroplating with silver and gold was found by John Wright, a surgeon from Birmingham.

  1. 1801Wollaston applies the principle of the voltaic pile to the deposition of one metal on another.
  2. 1836 and 1837The Elkingtons apply for patents, still for gilding with mercury.
  3. July 1838For the first time, an Elkington patent names a separate current.
  4. Early 1840sJohn Wright finds the suitable liquid.
  5. 1845Cooley’s cyclopaedia describes “Voltaic Gilding”.
  6. Since the 1990sThe Perth Mint issues gilded coins.
First Gold Rush 2026, reverse: tools, the number 175 and the rim in gold
First Gold Rush 2026First Gold RushPerth Mint, part‑gildedPart‑gilded
Perth Mint, Australia, 1 dollar, 1 ounce (31.1 g) of silver, fineness 999.9/1,000, 40.9 mm, part‑gilded.

For gilding, the Perth Mint in most cases dips the coin into a liquid containing gold; the current carries the gold onto the exposed silver. Its article from 2023 does not describe how only some areas become golden.

The duration of the electric current determines how many microns of gold are applied to the coin.

The Perth Mint, “Finishing touches make all the difference to coins”, 3 August 2023

How the colour gets onto the silver.

The Perth Mint has described how colour gets onto its coins. At the start there is a camera, at the end a cabinet with UV light.

Australian Emu 2026, reverse: emu in a coloured landscape
Perth Mint, Australia, 1 dollar, 1 ounce (31.1 g) of silver, fineness 999.9/1,000, 40.9 mm, coloured.

The mint used to apply the colour by pad printing; today it uses an LED UV printer developed specifically to colour coins. First, a digital camera records the areas of the design that receive colour. Then the printer applies a primer, on top of it white and then the colours. After that, the coins go into a UV cabinet for a set time.

Any coins which are blemished are melted back down, cast back to blocks of metal, ready to begin the process again until perfection is reached.

The Perth Mint, “How are coins coloured?”, 16 November 2022
not to scale

What the certificate says.

The case of the two golden elephants holds a card. Three details are on it.

Open wooden case. In the lid a card with the logo KETTNER EDELMETALLE, since 2011, the heading ECHTHEITS‑ZERTIFIKAT and the number 001/250; in front of it stands the part‑gilded elephant with REPUBLIC OF LIBERIA and 20 DOLLARS.
The case of the part‑gilded elephant, product photo
  1. The logo KETTNER EDELMETALLE, since 2011
  2. The heading ECHTHEITS‑ZERTIFIKAT
  3. The number 001/250

The number after the slash corresponds to the mintage of 250 pieces. The card does not say how thick the gold or colour is, or who applied it.

Mints keep figures as well. In its list, the Perth Mint distinguishes between the “Maximum Mintage” and the “Declared Mintage”. On its product page for the coloured 2021 Quokka in proof, it gives the maximum mintage and a numbered certificate.

Quokka 2021, reverse: coloured quokka
Perth Mint, Australia, 1 dollar, 1 ounce (31.1 g) of silver, fineness 999.9/1,000, 40.9 mm, proof, coloured.
Golden Orb Weaver 2026, reverse: gold spider on a black fieldGolden Orb Weaver 2026Orb Weaver 2026Gold spider, black fieldGold spider

Quokka 2021 1oz Silver Proof Coin

SKU 21H49BAA

Maximum Mintage
5,000
Finish
Proof, Coloured

Accompanied by a numbered certificate of authenticity, the coin is housed in a classic display case with a clear lid.

The Perth Mint, product page

What a special finish likes.

Gold and colour lie on the surface of the coin. What harms it is described by two mints and a government institute for conservation.

not to scale
  • Hold by the rim
  • Do not polish
  • Do not wipe
  • Talk little over the coin

The Royal Canadian Mint advises anyone who is not a specialist not to clean coins; even wiping them with a soft cloth can damage the surface. Coins should always be held by the rim, and one should talk over them as little as possible, because tiny droplets of saliva can leave spots that no longer come off. According to the Perth Mint, proof, coloured and gilded coins need a protective acrylic capsule. So that they do not rub inside it, the rim must be the thickest part of the coin.

Polishes will damage gilding.

Canadian Conservation Institute, CCI Note 9/7, care of silver
Maltese Ox 2025, reverse: wavy coin with a silver rim, a gold field and a black ox headMaltese Ox 2025Maltese OxMalta, 5 euros, gold fieldGold field
Sources: Clabaugh 1946 (W. S. Clabaugh, Journal of Research of the National Bureau of Standards, vol. 36); National Nanotechnology Coordination Office (“Just How Small Is ‘Nano’?”); Oddy 1995 (Andrew Oddy, “A history of gilding with particular reference to statuary”); Dictionary of National Biography 1889 (vol. 17, “Elkington, George Richards”); The Perth Mint, articles dated 16 November 2022 and 3 August 2023, list “Other Bullion Products” dated 11 April 2025, product page Quokka 2021; Royal Canadian Mint, Coin Care; Canadian Conservation Institute, CCI Note 9/7. Engraving after a drawing by Bonaventure‑Louis Prévost, “Doreur sur métaux”, plate I, Paris Musées, Musée Carnavalet, Histoire de Paris, CC0. Workbench scene AI‑generated. Coin photos and case: product photos from the shop of Kettner Edelmetalle.

Partially gilded silver coins combine two precious metals in a single strike: the cool, bright shine of silver and the warm glow of gold. It is precisely this contrast that makes them firm favourites among many collectors, the applied gold layer raises individual design elements such as wings, eyes, ornaments or lettering in sharp relief and gives the design added depth. These enhanced issues are usually released in small mintages and with an elegant presentation. The following sections cover the finishing technique behind partial gilding, popular designs and denominations, authenticity, storage and the special tax treatment.

What defines partially gilded silver coins

A partially gilded silver coin is essentially made of fine silver, usually with a fineness of 999 or 999.9. Unlike a fully gilded coin, the gold is not applied across the whole surface but only to selected areas of the design. This creates the characteristic interplay: the silver base remains visible, while gilded details such as an eagle's head, a flower or a constellation emerge in gold from the relief.

The gilding is an additional step carried out after the actual striking. Because the gold layer is extremely thin, it practically does not change the weight of the coin, a partially gilded one-ounce coin still weighs the full 31.1 grams of silver. The appeal therefore lies less in any added material value than in the appearance and the fascination for collectors. Anyone who appreciates such issues will find the full range of series from which these enhanced variants originate in the broader silver coins range.

Partially gilded, gilded or coloured: the difference

In the trade you will come across several related finishing techniques that are easily confused:

  • Partially gilded, gold only on individual parts of the design, the silver base remains dominant.
  • Gilded, the entire design or the whole side of the coin carries a layer of gold.
  • Coloured, coloured lacquer instead of or in addition to gold, often used for lifelike animal and themed designs; a wide selection is gathered in the coloured silver coins category.
  • Iced out, hologram or with inlays, special finishes featuring crystal elements, a prism effect or inset materials.

Many strikes combine several of these techniques, for example partial gilding with the prestigious Proof finish. The result is a particularly high-contrast, premium appearance.

Popular designs and series

The range of themes found on partially gilded silver coins is exceptionally broad. Because gilding highlights individual design elements, it is especially well suited to striking, expressive motifs. Common examples include:

  • Animal designs, from wolves to tigers and elephants to sharks and birds; related issues can be found, for example, in the Somalia Elephant range.
  • Classic bullion coins as special editions, partially gilded variants of well-known perennial favourites such as the Maple Leaf or the American Eagle.
  • Zodiac signs, mythical creatures and mythology, dragons, phoenixes, archangels or zodiac series.
  • Anniversary and themed issues, historical occasions, country-specific editions and limited sets.

A defining feature is the often low mintage, ranging from a few dozen to several thousand pieces. It is precisely this limitation that makes partially gilded issues sought-after items, once a mintage is sold out, the pieces can only be obtained on the secondary market. Anyone generally keen on limited and enhanced coins will also find plenty of interest in the rarities section.

A partially gilded coin tells a story in two metals: the silver carries it, the gold delivers the finishing touch.

Denominations and formats

By far the most common format is the 1 oz silver coin. It offers the design enough surface area for the partial gilding to make its full impact, while remaining affordable. Larger and smaller variants also exist to suit different preferences.

The common sizes at a glance

  • 1 oz (31.1 g), the standard and by far the largest part of the range.
  • 2 oz and 5 oz, more surface area for elaborate, detailed designs and high relief.
  • 1 kg, impressive display pieces, often issued in very small mintages.
  • Sets, multi-piece collections, often thematically linked and especially limited.

Collectors who prefer classic investment sizes should take a look at the regular Vienna Philharmonic series or at standard silver bars, where the pure material value takes centre stage, while partially gilded issues emphasise the emotional and artistic aspect.

Recognising authenticity and quality

With enhanced collector's coins, workmanship and condition are just as important as the pure precious metal content. The following features matter:

  1. Condition, terms such as Mint State (MS), Prooflike or Proof describe the striking quality. Proof offers the highest contrast between mirror-like fields and a frosted relief.
  2. Clean gold edges, with high-quality partial gilding, the transitions between gold and silver are precise and do not bleed into one another.
  3. Mintage figures and certificate, many limited issues come with a certificate of authenticity and a numbered mintage.
  4. Original packaging, the case, capsule and certificate are part of the collector's value and should be kept.

As a German family business with ISO-compliant authenticity verification, Kettner Edelmetalle places great value on verified goods and traceable provenance. Anyone wanting to delve deeper into conditions and finishes will find further information in the collector's coins section.

Storage and care

Enhanced coins in particular benefit from careful storage, as the fine gold layer and a sensitive mirrored field react to touch and environmental influences. Fingerprints, moisture and friction can permanently damage the surface.

  • Only touch the edges or wear cotton gloves, never touch the design itself.
  • Protection through capsules, precisely fitted coin capsules protect the surface from scratches and dust.
  • Order within a collection, coin cases and albums keep multiple pieces safe and organised.
  • Never clean or polish, any mechanical treatment reduces the value of a collector's coin.

For larger holdings, it is worth taking a look at the full accessories range, which spans everything from tubes to lockable storage solutions.

Tax and value considerations

In Germany, silver coins are subject to different tax rules than investment gold. While investment gold is exempt from VAT, silver coins are usually traded under the margin scheme. For private investors it also applies that profits from the sale of precious metals are tax-free after a holding period of one year. This information is for general guidance only and does not replace tax advice.

Collector's value rather than pure material value

The price of partially gilded silver coins is made up of the silver value plus a premium for the finish, mintage and design. Small mintages and sought-after themes can push the collector's value beyond the pure material value, although no reliable performance can be derived from this.

Anyone wishing to place greater emphasis on precious metal content often combines enhanced collector's pieces with classic investment items from the silver bullion coins range. This creates a collection that combines enjoyment of the design with the intrinsic value of silver.

Frequently asked questions about partially gilded silver coins

How much gold does a partially gilded silver coin contain? +

The gold layer is extremely thin and is applied only to individual parts of the design. Its share of the total value is therefore small, the material value is determined almost entirely by the fine silver. A 1 oz coin still contains the full 31.1 grams of silver.

What is the difference between partially gilded and gilded? +

On partially gilded coins, only part of the design carries a layer of gold, so silver and gold remain visible side by side. On gilded issues, the entire design or the whole side of the coin is covered in gold.

Are partially gilded silver coins more collector's items or investment items? +

The artistic appeal and collector's character take centre stage. With low mintages and elaborate finishes, they are classic collector's coins. Anyone focused primarily on precious metal content tends to choose standard bullion coins or bars instead.

What is the best way to store partially gilded coins? +

Precisely fitted coin capsules are ideal, complemented by cases or albums for the collection. The coin should only be touched at the edge and never cleaned or polished, as any mechanical treatment reduces both the surface quality and the collector's value.

Why do some issues sell out so quickly? +

Partially gilded silver coins are often released in heavily limited mintages ranging from a few dozen to several thousand pieces. Once an edition is sold out, it is not restruck and from then on is only available on the secondary market, which further increases its appeal for collectors.

What does the Proof condition mean? +

Proof denotes a particularly elaborate striking quality with a mirror-like background and a frosted, raised relief. Combined with partial gilding, this creates a particularly high contrast that emphasises the gilded details.

Get expert tips on wealth protection and be the first to hear about new products

Stay informed with product launches, financial news and exclusive offers. Sign up for our free newsletter today.

By entering your email address and clicking the "Submit" button, you give the following consent: "I agree to be informed by email about new products, financial news and exclusive offers, and therefore consent to the processing of my email address for the purpose of sending the newsletter. I can revoke this consent at any time without giving reasons, with effect for the future. The lawfulness of processing carried out prior to revocation remains unaffected."