Buy 10 g Silver Bars
- to
- In stock
10 x 1g Silver Bar CombiBar
Bon Scott 80th Birthday 2026 – 10g Silver Bar (Mintage: 5,000 | Brilliant Uncirculated)
10g Silver Bar Heraeus
10g Silver Bar Umicore
10g Silver Cowrie Shell Bar
Where minting stops.
Silver bars range from a few grams to about 31 kilograms. Between 10 grams and 15 kilograms, the small ones are usually minted and the large ones cast. Where one stops and the other begins, each house decides for itself.

Umicore mints its silver bars from 10 to 100 grams. From 250 grams on, the house casts them, right up to 15 kilograms.
At Heraeus, the line falls in the same place. There, the ounce and 100 grams are minted, while 250 and 500 grams and 1, 5 and 15 kilograms are cast.
Other houses draw the line somewhere else entirely. Heimerle + Meule already casts the ounce, a small square with sides of 23.5 millimetres. Valcambi still mints the kilo, 130 millimetres long and 11.2 millimetres thick.
The larger the bar, the more likely it is cast.
Sizes according to the makers, for Heraeus only the sizes the house itself lists; the minted ounce from Heimerle + Meule according to its bar in the shop. On the axis, it is as far from 10 to 100 grams as from 100 grams to 1 kilogram.

Why molten silver shuns the air.
When pure silver melts, it takes up oxygen from the air. As it solidifies, the oxygen escapes again, and that can happen violently. Old encyclopaedias call it spitting.
“When melted in contact with air, pure silver absorbs a great deal of oxygen, which, however, escapes at the moment of solidification …”
Pierer’s Universal‑Lexikon, volume 16, 1863, entry “Spratzen”, translated
In doing so, the oxygen breaks through the crust that has already set and drives out the silver that is still liquid, into a spongy mass from which beads of silver leap. That is how Pierer’s encyclopaedia describes it.
The chemist Gay‑Lussac caught the oxygen under a bell jar filled with water. He obtained twenty to thirty times the volume of the silver, Pierer reports. In 1911, the Encyclopaedia Britannica gives twenty times. These are figures from encyclopaedias of 1863 and 1911, not present-day measurements.
The remedy is given in the same article: stir while the silver solidifies, “but best of all” sprinkle charcoal powder on it before it sets. According to Pierer, silver with 1 to 2 per cent copper does not spit, but pure silver does.
The oxygen is not entirely out of the picture. When a refinery on the London list assays its silver with a spectrograph today, oxygen and nitrogen expressly count as silver.
Diagram after the description in Pierer’s Universal‑Lexikon of 1863, not to scale.

The dip in the top face.
Silver contracts strongly as it solidifies, the Meyers encyclopaedia of 1909 writes. On a cast bar, this shows on top: the top face can sink slightly in the middle, and rings from cooling can appear as well.
“Excessive shrinkage (i.e. the concavity of the top face of the Bar and any concentric cooling rings) must not significantly affect the clarity of the Bar marks or the safe stacking of the Bars.”
LBMA, Good Delivery Rules, Technical Specifications, section 2.1.4
The LBMA is the association of the London precious metals market. Its rules are written for the large bars of this market. They show what happens when silver is cast.
Silver has rules of its own there. A little hammering of the surface is allowed; for gold, at most the smoothing of a sharp burr. And closed moulds have been banned for silver since 2008, mainly because hidden cavities can form in them.
Cast bars are wider at the top than at the bottom. On the 15‑kilogram bar from Umicore, the top face measures about 235 by 100 millimetres and the bottom 210 by 80, with a height of 75 millimetres. For its silver bars, the LBMA requires a slope of 5 to 15 degrees, so that they are easy to grip.
Calculated from Umicore’s dimensions, the sides of its cast bars slope at about 6 to 10 degrees.
A cast bar shows on its top face how it solidified.
Dimensions from Umicore. In gold, the top face, the dip in it only suggested: its depth has not been measured. The slope is calculated from the top and bottom widths and the height.

Silver is assayed differently from gold.
For gold, the LBMA requires its referee laboratory to carry out the fire assay, at least six times. For silver, the laboratory measures what is not silver and subtracts it from 1,000 parts.
“In the case of silver, the Referee will normally use one or other spectrographic analysis method and determine the silver assay by difference (with dissolved gases such as oxygen counting as silver).”
LBMA, Good Delivery List Rules, January 2026, Annex D, section 2.3
These are the rules for the refineries on the London list. They show how differently the two metals are assayed.
For a long time, silver was assayed in fire, in small dishes called cupels. In 1832, the French mint commission published instructions by Gay‑Lussac, the same man who had caught the oxygen in silver. After that, it could also be done “by the wet way”: the silver is precipitated with a solution of common salt instead of being assayed in fire in the cupel.
In 1874, Jacob Volhard described another wet method, with thiocyanate instead of common salt.
The common salt assay lives on in the standards. ISO 13756 determines silver in jewellery and precious metals with sodium or potassium chloride, ISO 11427 with potassium bromide, both today in the edition of 2024 and for silver contents of 100 to 999 parts per thousand. For higher contents, both name spectroscopy by difference.
With silver, the rest is what counts: 1,000 parts minus everything foreign.
According to the LBMA rules of January 2026. The foreign share is drawn greatly enlarged.
Three pounds, stamped in.
Stamping the weight onto the bar is an old practice. The silver treasure of Kaiseraugst in Switzerland includes a bar from shortly after AD 350. Punched into it is P III, three Roman pounds.

The bar measures 12.3 by 7.8 centimetres and is 1 centimetre thick. It weighs 947.8 grams, which corresponds to three Roman pounds.
Beside it are two small stamps reading GRONOPI, probably the name of the official in charge, and a round stamp with the bust and name of the Emperor Magnentius.
A kilo bar of today weighs almost the same, yet has a different shape. The cast kilo bar from Heraeus measures 111 by 51 millimetres and is 21 millimetres thick, more than twice as thick as the Roman bar.
Much older still is a silver bar with Hittite hieroglyphs in the Metropolitan Museum in New York, from the 14th to 13th century BC.
More than 1,650 years ago, the weight was already on the bar.
Dimensions: Augusta Raurica, Augster Blätter zur Römerzeit 10, and the makers. All three from above at the same scale, the kilo bars as product photos from the shop, the Roman bar drawn as an outline to its dimensions.
The 10 g silver bar is the small entry point into the world of precious metals: compact, affordable and with the familiar shine of 999 fine silver. Hardly any other format combines the emotional appeal of a genuine silver bar so directly with a price that also allows for spontaneous purchases or a well-considered gift. This guide examines production, fineness, the most important mints, the tax particularities of silver, and the question of who the 10-gram format is truly worthwhile for.
What defines the 10 g silver bar
A 10 g silver bar contains exactly ten grams of fine silver with a fineness of 999/1,000: in other words, virtually pure silver. Despite its low weight, the bar has a remarkable value density and fits comfortably into a trouser pocket, a purse or a small capsule. This makes it one of the smallest sensibly tradeable silver bar formats and marks, for many, the first step into physical precious metal investment.
The appeal lies in its accessibility: anyone wanting to ease into the subject of precious metals does not need to invest large sums. At the same time, the format remains tangible and genuine: a piece of silver you can hold in your hand, unlike purely digital forms of investment. Those who want to gradually build up more silver can later move effortlessly into larger denominations.
Minted or cast: the production of small silver bars
Fundamentally, silver bars are produced in two ways: minted or cast. For small formats such as the 10-gram bar, minting clearly dominates. A rolled fine silver blank is struck under high pressure to form the bar, creating sharp edges, a clean design and a shiny, even surface. Cast bars, where liquid silver is poured into a mould, are, by contrast, more commonly found in larger denominations such as the 1 kg silver bar.
Minted small bars generally carry a protected strike with the manufacturer's logo, weight and fineness. Many are additionally delivered sealed in a blister card or capsule: this protects the sensitive surface from scratches and tarnishing while also documenting its authenticity. Suitable coin capsules are excellent for storage, helping preserve the condition over the long term.
- Minted bars: precise edges, fine relief, usually in sealed packaging; the standard for the 10 g format.
- Cast bars: a more rustic character, visible casting structure; only common at larger weights.
- 999 fineness: the industry standard for investment silver, sometimes also 999.9 (extra fine silver).
Manufacturers and quality features
The quality of a silver bar hinges on the mint. Established manufacturers such as Umicore, Heraeus, Degussa, Argor-Heraeus or PAMP enjoy the highest international trust. Many of these houses are certified by the London Bullion Market Association (LBMA): this is considered a seal of quality for purity and flawless workmanship and noticeably eases any later resale.
How to recognise quality
A high-quality 10 g silver bar shows a clean, burr-free strike with clearly legible details of weight and fineness. Renowned brands such as Umicore or Heraeus stand for consistent workmanship and broad market acceptance. Anyone who pays attention to well-known mints and an intact original packaging minimises the risk and secures a product that raises no questions, even when it comes to resale.
Price, premium and the economics of small bars
The price of a silver bar is made up of the current silver price and a premium that covers production, distribution and trading margin. This is where the key particularity of small formats lies: because producing a 10 g bar is roughly as labour-intensive as producing a considerably heavier one, the percentage premium per gram is naturally higher for the small format. Anyone focused purely on getting as much silver as possible per euro is better off with larger units such as the 100 g silver bar or the 500 g silver bar.
This does not mean the small bar is uneconomical: one should simply know what it is suited for. Its strength is not the maximum gram count per euro, but its divisibility and low entry price. For many, that is exactly what counts: small, manageable amounts that can be saved up flexibly and bit by bit.
Good to know
The smaller the denomination, the higher the percentage premium on the pure silver value. The 10 g silver bar therefore scores less as a pure gram-saving investment and more as an affordable gift, a small crisis reserve and an emotional entry point into the subject of precious metals.
Tax treatment of silver
Unlike investment gold, silver is not exempt from VAT in Germany. Standard VAT applies when purchasing silver bars. For imported silver coins, the so-called margin scheme taxation often applies, whereas bars are usually charged at the standard tax rate. This difference is one of the reasons why many investors consider silver coins alongside bars.
Another point concerns the holding period: profits from the sale of physical silver can be tax-free after a holding period of one year. As tax regulations change and depend on the individual case, this general information does not replace individual tax advice.
Note on VAT
Silver bars are subject to VAT in Germany, while investment gold is VAT-exempt. Anyone wanting to weigh up the tax aspect should consciously weigh bars against coins.
Who the 10 g silver bar is suited for
The 10-gram format plays to its strengths in three situations in which it is less about optimising grams and more about practicality and emotion.
As a gift
A genuine silver bar is a gift with substance: enduring in value, timeless and far more personal than a voucher. For christenings, birthdays, graduations or as a small token of appreciation, the compact bar brings joy and stays memorable. The gift ideas category offers further inspiration around precious metals as presents.
As a crisis reserve and means of exchange
Small denominations are regarded as a practical reserve for crisis scenarios: a 10 g bar represents a manageable value and could be exchanged more easily in an emergency than a large, expensive bar. Anyone considering the idea of provisioning will find curated assortments of small units in the crisis protection packages.
As an entry point and savings building block
Anyone wishing to regularly put small amounts into precious metals can build up a position piece by piece with 10 g bars. For a planned, instalment-based saving approach, the savings plan products are suitable, enabling continuous wealth building in small steps.
The 10 g silver bar compared to other formats
Whether the small format is the right choice depends on the goal. Anyone seeking the maximum quantity per euro reaches for larger bars; anyone who values divisibility and a low entry point is well served by the 10-gram bar.
- 10 g vs. larger bars: the 250 g silver bar and the 1 kg silver bar offer significantly more favourable price per gram, but are less divisible in return.
- 10 g vs. silver coins: bullion coins such as the Maple Leaf or the Vienna Philharmonic bring a state guarantee and, in some cases, margin scheme taxation.
- 10 g vs. combi formats: divisible CombiBars combine many small units in a single piece, thereby mitigating the unit-cost disadvantage.
Anyone wishing to diversify more broadly and invest in gold beyond silver will find a comparable entry format on the gold side with small 10 g gold bars. For coordinated combinations of both metals, the gold-silver mix packages are a good option.
Storage and value preservation
Silver reacts more sensitively to environmental influences than gold and can tarnish on contact with air and moisture. Although tarnishing does not change the original value, careful storage is worthwhile for appearance and a smooth resale. Leave bars in their sealed original packaging and store them in a dry place: this preserves the flawless condition for the longest time.
- Keep bars in their original capsule or blister card wherever possible.
- For loose bars, use suitable coin capsules or coin cases.
- Dry, temperature-stable storage protects against tarnishing and moisture.
- Keep larger holdings securely in a safe or bank safe deposit box.
Frequently asked questions about 10 g silver bars
What fineness does a 10 g silver bar have? +
Typical 10 g silver bars consist of 999 fine silver, sometimes even 999.9 extra fine silver. The fineness is stamped on the bar and documents the proportion of pure silver.
Why is the premium higher on small silver bars? +
Producing a small bar incurs fixed costs similar to those of a large one. These costs are spread over less silver in the 10 g format, which means the percentage premium per gram turns out higher than for larger denominations.
Does VAT apply when buying silver bars? +
Yes. Unlike investment gold, silver bars are not exempt from VAT in Germany. For certain imported silver coins, margin scheme taxation sometimes applies.
Is a 10 g silver bar suitable as a gift? +
Very much so. The compact bar made of genuine fine silver is enduring in value, timeless and more personal than a voucher. For occasions such as christenings, birthdays or graduations, it is a popular choice.
Which manufacturers produce 10 g silver bars? +
Bars from renowned mints such as Umicore, Heraeus, Degussa, Argor-Heraeus or PAMP are widespread. Many of these manufacturers are LBMA-certified, which supports purity and resaleability.
How should a 10 g silver bar best be stored? +
Ideally in its sealed original packaging or a suitable capsule, stored dry and at a stable temperature. This keeps the surface protected from scratches and tarnishing.












